Novell Mib Objects - HP T9576G06 Management Manual

IPX/SPX Subagent (G-Series)
Manager Timeouts
The greater the number of MIB values maintained, the longer it takes the subagent to
refresh the values. You can minimize data refresh wait time by providing a long refresh
interval in the -r startup parameter at startup, then forcing value updates when required
after startup by setting the value of tdmNwSaRefreshNow to forceDyamicRefresh.
You can also configure some managers so that their timeouts and retries
accommodate longer response times; setting the timeout value to 5 to 9 seconds and
the retry value to 0 or 1 may be sufficient.

Novell MIB Objects

The IPX/SPX Subagent supports the objects in one of the five groups defined by
Novell: the ipxSystem group. This group contains a table whose entries each represent
a single instance of the IPX/SPX protocol stack. The IPX/SPX Subagent supports the
objects identified by a check mark in the following list, which shows all the groups in
Novell's MIB:
iso (1)
org (3)
dod (6)
internet (1)
private (4)
enterprises (1)
novell (23)
mibDoc (2)
ipx (5)
ipxSystem (1)
ipxBasicSysTable (1)
ipxBasicSysEntry (1)
ipxBasicSysInstance (1)
ipxBasicSysExistState (2)
ipxBasicSysNetNumber (3)
ipxBasicSysNode (4)
IpxBasicSysName (5)
ipxBasicSysInReceives (6)
ipxBasicSysInHdrErrors (7)
ipxBasicSysInUnknownSockets (8)
ipxBasicSysInDiscards (9)
ipxBasicSysInBadChecksums (10)
ipxBasicSysInDelivers (11)
ipxBasicSysNoRoutes (12)
ipxBasicSysOutRequests (13)
ipxBasicSysOutMalformedRequests (14)
ipxBasicSysOutDiscards (15)
ipxBasicSysOutPackets (16)
ipxBasicSysConfigSockets (17)
SNMP Configuration and Management Manual—424777-006
13-18
Novell MIB Objects