Sample Data - HP T9576G06 Management Manual

Host Resources Subagent
Table 11-15. zhrmSaProcess Group Objects Supported by Host Resources
Subagent's MIB (page 3 of 3)
Object and Attributes
zhrmEnableSoftwareGroup
1.3.6.1.4.1.169.3.180.4.17
read-write
INTEGER {
swValuesDisabled(0),
swValuesEnabled(1) }
zhrmSwitchToBackupNow
1.3.6.1.4.1.169.3.180.4.18
read-write
INTEGER {
autoProcessPairControl(0),
forceBackupTakeover(1) }
zhrmExamineGuardian
1.3.6.1.4.1.169.3.180.4.19
read-write
INTEGER {
disabled(0),
enabled(1) }
zhrmExamineOSS
1.3.6.1.4.1.169.3.180.4.20
read-write
INTEGER {
disabled(0),
enabled(1) }

Sample Data

Time, zhrmSaProcCurrTime, zhrmSaProcVersion, zhrmSaProcName, zhrmSaPaid,
zhrmSaPID, zhrmSaCreatTime, zhrmSaCpuTime,
zhrmSaPri, zhrmSaHomeTerm, zhrmSaIniFile, zhrmSaHeapInitial,
zhrmSaHeapCurrent, zhrmGetPDUsCounter,
zhrmGetNextPDUsCounter, zhrmSetPDUsCounter, zhrmTrapPDUsCounter,
zhrmEnableSoftwareGroup, zhrmSwitchToBackupNow
05/22/95 10:28:36, May 22, 1995 10:21:30, T8496D20_06JUL95_28APR95 -- Tandem
Host Resources Subagent, $HMSA1, 255,255,
(0,47), started May 20, 1995 17:20:20.7, 0:28:50.582,
145, \SHERIFF.$ZTNT.#PTY4, \sheriff.$dsm.vinhms.hmsaini, 1536000, 279408, 0,
822, 2, 2, swValuesEnabled, autoProcessPairControl
Definition
A switch that
suppresses
maintenance of
hrSWRun and
hrSWRunPerf
group objects
when set to 0.
A switch that
causes the
subagent's
backup process
to take over and
a new backup
process to be
created when set
to 1.
A switch that
enables or
disables
monitoring of the
Guardian
personality.
A switch that
enables or
disables
monitoring of the
OSS personality.
SNMP Configuration and Management Manual—424777-006
Format of Value
One of these values is
displayed:
swValuesDisabled
swValuesEnabled
When setting these
values, use 0 or 1.
One of these values is
displayed:
autoProcessPairControl
forceBackupTakeover
When setting these
values, use 0 or 1.
One of these values is
displayed:
disabled
enabled
When setting these
values, use 0 or 1.
One of these values is
displayed:
disabled
enabled
When setting these
values, use 0 or 1.
11 -94
Sample Data
Derivation of Value
At startup, the subagent
sets this value to 1
(swValuesEnabled)
unless the -w startup
parameter is used. The -
w startup parameter sets
this value to 0.
At startup, the subagent
sets this value to 0
(autoProcessPairControl)
but it can be changed
from an SNMP manager
if the subagent was
started using the -b
startup parameter.
If the -u option is
specified but the -t option
is not specified, this is set
to 0. Otherwise it is set to
1 at startup.
If the -u option is
specified, this is set to 1;
otherwise, it is set to 0 at
startup.