Table 6-2. Keywords For Nonstop Snmp Agent Ptrace Select Command - HP T9576G06 Management Manual

SNMP Agent PTrace Facility
CURRENT
selects the currently defined trace-selection options.
number
is an integer that specifies an enumerated value corresponding to a specific
keyword.
number can be specified in decimal, octal, hexadecimal, or binary notation. When
you specify number, it is saved as an enumerated value. The formats and ranges
follow:
decimal:
hexadecimal:
binary:
keyword
is one of the keywords listed in

Table 6-2. Keywords for NonStop SNMP Agent PTrace SELECT Command

Keyword
METHOD
COMMON
Consideration: PTrace SELECT Command
If the SELECT command is not entered, or if the SELECT command is specified with
no keywords, ALL is assumed.
Examples: PTrace SELECT Command
1. The following command sequence positions the record pointer at record 1 and
changes the detail to off to display header information only:
?RECORD 0
Trace of:
Ptrace Data File:
Trace started:
First trace entry:
Last trace entry:
Trace file is in extended format.
Trace entry size limit:
?DETAIL off
Ptrace Detail Format:
0 - 32767
octal: %0 - %77777
%H0 - %H7FFF
%B0 - %B111111111111111
Value Meaning
1 Enables the tracing of the trace records written by the
NonStop agent only
254 Enables the tracing of the trace records written by the
Common Kernel only
SNMP Configuration and Management Manual—424777-006
Table 6-2.
\NOVA.$ZSNMP, Type (31,30).
$DATA5.SNMT101.ZZSMPTRP
11/19/97 11:27:50.33
11/19/97 11:27:50.63
11/19/97 11:27:53.76
0
OFF
6- 11
SELECT Command