HP T9576G06 Management Manual page 680

Ethernet Subagent
ZEMS-VAL-reason
indicates the reason the backup Ethernet Subagent process has become available.
The DDL AS clause associated with this value is inserted in the message text
following "reason."
Value of
ZEMS-TKN-CHANGE-REASON
ZEMS-VAL-UNDERLYING-UP
ZEMS-VAL-OPERATOR-INITIATED
ZESA-VAL-STATE-state
indicates the previous state of the backup Ethernet Subagent process. The DDL
AS clause associated with this value is inserted in the message text following
"previous state."
Value of
ZEMS-TKN-STATE-PREVIOUS
ZESA-VAL-STATE-CONNECTED
ZESA-VAL-STATE-DISCONNECTED
ZESA-VAL-STATE-ENABLED
ZESA-VAL-STATE-DISABLED
ZESA-VAL-STATE-CONNECTED
indicates the current state of the backup Ethernet Subagent process. The DDL AS
clause of this value ("connected," defined above) appears in the message text
following "current state."
ZEMS-VAL-NULL
indicates the type of subsystem defined event. Because the Ethernet Subagent
process has not defined this as a private event, the DDL AS clause "undefined"
always appears in the message text following "user content."
SNMP Configuration and Management Manual—424777-006
3005: ZESA-EVT-BACKUP-OBJ-AVAIL
Associated Text (DDL AS Clause) and
Meaning
"underlying-serv-up" indicates that the backup
Ethernet Subagent process is available
because an underlying resource on which it
depends has become available.
"operator-initiated" indicates that an operator
has brought the backup Ethernet Subagent
process up by setting the zesaBackupState
MIB object to "enabled."
Associated Text (DDL AS Clause)
"connected" indicates a normal operational
state.
"disconnected" indicates a nonoperational
state where subagent function dependent on
the interface was not available.
"enabled" indicates that the process was set
by an operator such that the subagent would
immediately attempt to restore it to a
connected state.
"disabled" indicates that the process had
been taken out of service explicitly by an
operator setting the zesaBackupState MIB
object to "disabled."
14-44