The Ipx/Spx Subagent Mib - HP T9576G06 Management Manual

IPX/SPX Subagent (G-Series)

The IPX/SPX Subagent MIB

The subagent MIB contains objects that characterize IPXPROTO processes as well as
objects that characterize the subagent process:
iso (1)
org (3)
dod (6)
internet (1)
private (4)
enterprises (1)
novell (23)
tandem (169)
IPXPROTO Process Objects
The MIB objects that support IPXPROTO process management are located in two
groups:
The ipxSystem group, defined by Novell, provides information about the basic IPX
protocol stack. This group consists of one table, the ipxBasicSysTable, whose
entries characterize IPX packet-handling statistics for IPXPROTO processes. The
subagent provides read-only access to all the objects in the ipxSystem group.
The zipx group, defined by HP, gives read-only access to various IPXPROTO
process characteristics. This group contains five groups, each of which consists of
one table:
The tdmNwInfo group contains the tdmNwInfoTable, whose entries describe
attributes of IPXPROTO processes, such as the name of the TLAM port or
SLSA logical interface (LIF) being used.
The tdmNwIPX group contains the tdmNwIPXTable, whose entries provide
statistical information about the IPX layer of IPXPROTO processes.
mibDoc (2)
ipx (5)
ipxSystem (1)
nonstopsystems (3)
zipx (164)
tdmNwInfo (1)
tdmNwIPX (2)
tdmNwSPX (3)
tdmNwNCP (4)
tdmNwServer (5)
zisa (196)
tdmNwSubagent (1)
tdmNwSaConfig (1)
tdmNwSaAgentNamesTable (2)
tdmNwSaIPXPROTONamesTable (3)
SNMP Configuration and Management Manual—424777-006
IPXPROTO process objects
IPXPROTO process objects
IPX/SPX Subagent process objects
13- 4
The IPX/SPX Subagent MIB