Info Trapdest Command - HP T9576G06 Management Manual

SCF Commands for the SNMP Agent
Example: INFO PROFILE
The following example displays the attribute values of all the entries in the
authentication table used by NonStop agent process $ZSNMP:
-> INFO PROFILE $ZSNMP.*
SNMP Info PROFILE
Name
$ZSNMP.#DEFAULT READONLY
$ZSNMP.#LANMGR

INFO TRAPDEST Command

Use the INFO TRAPDEST command to display the current attribute values for a trap
destination definition.
INFO TRAPDEST [$agent-process.]#trapdest-name [, DETAIL ]
[$agent-process.]#trapdest-name
identifies the trap destination definition whose attribute values you want to display.
$agent-process
identifies the NonStop agent process to which the TRAPDEST object belongs.
It consists of a dollar sign ($) followed by one to five alphanumeric characters,
the first of which must be alphabetic.
#trapdest-name
identifies the TRAPDEST object. It consists of a pound sign (#) followed by one
to seven alphanumeric characters, the first of which must be alphabetic.
DETAIL
specifies that the display contain additional information about the object set.
Example: INFO TRAPDEST
The following example displays information about all the trap destinations defined for
NonStop agent process $ZSNMP:
-> INFO TRAPDEST $ZSNMP.*
SNMP Info TRAPDEST
Name
$ZSNMP.#TRAP
$ZSNMP.#REMOTE
*Access
READWRITE
*Network
\EAST.$ZTC0
\WEST.$ZTC1
SNMP Configuration and Management Manual—424777-006
*Hostaddr
0.0.0.0
130.252.86.10
*Hostaddr
130.252.86.10
130.252.86.241
5- 24
INFO TRAPDEST Command
*Community
public
Private
*Community
Tandem
public