HP T9576G06 Management Manual page 623

IPX/SPX Subagent (G-Series)
ZISA-VAL-STATE-DISCONNECTED
is the current state. The DDL AS clause of this value ("disconnected") appears in
the message text following "current state:".
ZEMS-TKN-CONTENT-USER
is assigned the value "undefined" in the message text following "user content:".
ZISA-VAL-DISCONNECTED
is the value assigned to the ZISA-TKN-OBJ-STATE token.
ZISA-VAL-reason
is one of the following values, assigned to the ZISA-TKN-OBJ-STATE-REASON
token:
ZISA-VAL-OPERATOR-REQUEST
ZISA-VAL-RESOURCE-PROBLEM
Cause. The cause depends on the reason for the stoppage:
Change Reason
operatorrequest
resource-problem
Effect. The subagent is no longer running in fault-tolerant mode.
Recovery. Correcting the situation depends on the reason for the stoppage:
Change Reason
operatorrequest
resource-problem
Sample Message
96-01-30 16:50:50 \COMM.$ZISA TANDEM.IPXSA.D30 001006 Object
Cause
The value of tdmNwSaBackupState object was deliberately
set to disconnected.
The CPU in which the backup process was running failed, or
a critical resource was not available.
Recovery
No action is required because the stoppage was deliberate.
If a CPU failure caused the problem, use a Set operation to
change the value of tdmNwSaBackupCPU to an available
CPU, then Set the value of tdmNwSaBackupState to
connected. You can also reload the CPU that failed, and
the subagent backup process automatically restarts.
unavailable backup-process-resource-object
- \COMM.$ZISA, event number:
backup-unavailable, cause: operatorrequest,
previous state: connected, current state:
disconnected, user content: undefined
SNMP Configuration and Management Manual—424777-006
1006: ZISA-EVT-BACKUP-UNAVAILABLE
13-61