Multiple-Host Connections - HP T9576G06 Management Manual

Installing and Configuring the SNMP Agent
The SCF commands used to configure the ENDPOINT and TRAPDEST objects in
Figure 2-8 are:
ASSUME PROCESS $ZSNM0
STOP ENDPOINT #DEFAULT
ALTER ENDPOINT #DEFAULT, NETWORK $ZTC1, &
HOSTADDR 130.25.88.1
START ENDPOINT #DEFAULT
ADD TRAPDEST #STA1, HOSTADDR 130.25.86.15
START TRAPDEST #STA1
ASSUME PROCESS $ZSNM1
STOP ENDPOINT #DEFAULT
ALTER ENDPOINT #DEFAULT, HOSTADDR 130.25.88.2
START ENDPOINT #DEFAULT
ADD TRAPDEST #STA1, NETWORK $ZTC0, HOSTADDR 130.25.86.15
START TRAPDEST #STA1

Multiple-Host Connections

The TCP/IP process handling the sending of traps does not have to be on the same
node as the agent process.
Note. Parallel Library TCP/IP and Nonstop TCP/IPv6 do not support Multi-Host connections.
SNMP Configuration and Management Manual—424777-006
2- 43
Multiple-Host Connections