HP T9576G06 Management Manual page 649

Ethernet Subagent
Table 14-3. Private (ZESA) MIB Objects Supported by the Ethernet
Subagent (page 2 of 5)
Object and Attributes
zesaProcessUserID
1.3.6.1.4.1.169.3.217.8
read-only
INTEGER (0..255)
zesaPrimaryCPU
1.3.6.1.4.1.169.3.217.9
read-only
INTEGER (0..255)
zesaPrimaryPIN
1.3.6.1.4.1.169.3.217.10
read-only
INTEGER (0..255)
zesaBackupCPU
1.3.6.1.4.1.169.3.217.11
read-write
INTEGER (0..255)
zesaBackupPIN
1.3.6.1.4.1.169.3.217.12
read-only
INTEGER (0..255)
zesaBackupState
1.3.6.1.4.1.169.3.217.13
read-write
INTEGER
Definition
The NonStop Kernel
process user ID part of
the process access ID
(PAID) for the Ethernet
Subagent process.
The number of the
processor in which the
primary Ethernet
Subagent process is
running.
The process
identification number
(PIN) of the primary
Ethernet Subagent
process.
The number of the
processor in which the
backup process will start
or is running.
The process
identification number
(PIN) of the backup
Ethernet Subagent
process.
The state of the
Ethernet Subagent
backup process.
SNMP Configuration and Management Manual—424777-006
Format and Derivation of Value
user-ID-number
cpu-number
PIN-number
cpu-number specified for the -b
startup parameter. After startup, the
value can be set by an SNMP
manager.
A value of -1 indicates the backup is
not configured.
Setting this object is permitted only if
zesaBackupState is set to disabled
(3). Once zesaBackupCPU has been
set to a new value, zesaBackupState
must be set to enabled (4) for the
new value to take effect.
PIN-number
A value of -1 indicates that the
backup is not running.
Following are valid states for the
backup process:
connected (1)
disconnected (2)
disabled (3)
enabled (4)
This value can be set with an SNMP
request as illustrated by the state
change diagram in
page 14-18.
14-13
ZESA MIB Objects
Figure 14-2 on