The Trap Pdu - HP T9576G06 Management Manual

EMS Trap Subagent
To stop the subagent process, provide its name in the STOP command:
STOP $ZSNMP

The Trap PDU

The trap PDU contains these fields:
enterprise
agent-address
generic-trap
specific-trap
time-stamp
variable-bindings The objects defined in the EMS Trap MIB, described in the
The object identifier for the SNMP agent, indicating the origin of
the trap: 1.3.6.1.4.1.169.3.155.1.
The Internet address of the system on which the SNMP agent
forwarding the trap is installed.
A 16-bit number set to 6 to signify that the trap is
enterpriseSpecific.
A 16-bit number set to 0.
A 32-bit number indicating how much time has passed since the
SNMP agent was last started. The subagent inserts 0, and the
SNMP agent inserts the value of sysUpTime, which is defined in
Table 3-1, System Group Objects Supported by SNMP Agent,
page 3-4.
following subsection.
SNMP Configuration and Management Manual—424777-006
9- 10
The Trap PDU
on