Next Command - HP T9576G06 Management Manual

SNMP Agent PTrace Facility
Considerations: PTrace FROM Command
The FROM command resets current session parameters to their default values.
For more information, see the RESET Command in the PTrace Reference Manual.
The FROM command resets current SELECT options to their default values if the
device type and subtype of the new trace file are different from the last trace file.
If the device type and subtype of the new trace file are the same as the last trace
file, the SELECT option is not reset.
The FROM command automatically displays the trace file header record (record 0)
when it opens the new trace file.
The FROM command does not close a log file if one is specified.
Example: PTrace FROM Command
The following example closes the previous trace file (if any), opens the trace file called
ZZSMPTRP in the subvolume SNMT101 in the current system and volume, resets
session parameters to their defaults, and displays the trace file header record:
?FROM snmt101.zzsmptrp
Trace of:
Ptrace Data File:
Trace started:
First trace entry:
Last trace entry:
Trace file is in extended format.
Trace entry size limit:
Select options are reset.

NEXT Command

The NEXT command displays records starting from the next record in the trace file.
The number of records displayed by a single NEXT command never exceeds the
number set by the LIMIT command. Records that do not meet the current selection
criteria are not counted and are not displayed.
N[EXT] [ count ] [ AFTER [date] time ]
count
specifies the number of records to be displayed. If count is omitted, one record is
displayed.
AFTER [date]time
indicates that PTrace is to move to the first record whose timestamp is greater than
or equal to the [date] time specified before selecting the next records for display.
\NOVA.$ZSNMP, Type (31,30).
$DATA5.SNMT101.ZZSMPTRP
11/19/97
11/19/97
11/19/97
0
SNMP Configuration and Management Manual—424777-006
11:27:50.33
11:27:50.63
11:27:53.76
6 -7
NEXT Command