Hrdevice Group - HP T9576G06 Management Manual

Host Resources Subagent
hrStorage group MIB values are initialized at startup time and then refreshed at a
frequency controlled by the -s and -d startup parameters:
-s hrStorageIndex
hrStorageType
hrStorageDescr
hrStorageAllocationUnits
-d hrMemorySize
hrStorageSize
hrStorageUsed
hrStorageAllocationFailures
The values of these objects can be refreshed on demand from an SNMP manager
after the subagent is running. Values associated with the -s startup parameter are
refreshed by setting the value of zhrmStableRefreshNow in the zhrmRefresh group.
Values associated with the -d startup parameter are refreshed by setting the value of
zhrmDynamRefreshNow in the zhrmRefresh group.
When values of hrStorage group objects are refreshed, values for objects in the
following groups are also refreshed:
The hrSWRun and hrSWRunPerf groups
Three of the groups defined by HP: zhrmTableInfo, zhrmThreshold, and
zhrmRefresh

hrDevice Group

The hrDevice group is a large group consisting of a main table (the hrDeviceTable),
five dependent tables (hrNetworkTable, hrProcessorTable, hrPrinterTable,
hrDiskStorageTable, and hrPartitionTable), and the hrFSTable. Objects in the hrDevice
group describe processors, network devices, printers, disks, partitions, and file
systems on the host. The Host Resources Subagent's MIB supports the objects
identified by a check mark in the following list:
iso (1)
identified-organization (3)
dod (6)
internet (1)
mgmt (2)
mib-2 (1)
host (25)
hrDevice (3)
hrDeviceTable (2)
hrDeviceEntry (1)
hrDeviceIndex (1)
hrDeviceType (2)
hrDeviceDescr (3)
hrDeviceID (4)
SNMP Configuration and Management Manual—424777-006
11 -35
hrDevice Group