Controlling A Running Tcp/Ip Subagent - HP T9576G06 Management Manual

TCP/IP Subagent
Table 8-1. Querying a TCP/IP Subagent Through SNMP (page 2 of 2)
You can find out this about the TCP/IP Subagent...
Rate at which SPI INFO based object values are refreshed
TCP/IP process being monitored
State of the connection between subagent and monitored TCP/IP
process
SCP process used for SPI requests
Name of the TCP/IP subsystem
Status of the TCP/IP subsystem
Name of the subnets associated with the TCP/IP subsystem
Status of the subnets
IP address of the subnets
* Name of the TCP/IP subsystem(s) monitored using the -s startup option.
These objects are described in detail in
Supported by the TCP/IP Subagent,

Controlling a Running TCP/IP Subagent

In addition to getting information about a running TCP/IP Subagent, you can control
certain aspects of its behavior by issuing SNMP Set requests from an SNMP manager,
as described in
All subagent attributes that can be controlled by setting MIB object values are
reinitialized when the subagent is restarted to default values or values specified in
startup parameters.
*
being monitored
Table 8-2.
SNMP Configuration and Management Manual—424777-006
Controlling a Running TCP/IP Subagent
Table 8-3, Private (ZTSA) MIB Objects
on page 8-21.
8- 17
By issuing an SNMP
Get request against
this ztsa object...
ztsaInfoCache
ztsaTcpIpProcess
ztsaTcpIpState
ztsaScpProcess
ztsaTcpIpName
ztsaTcpIpStatus
ztsaSubnetName
ztsaSubnetStatus
ztsaSubnetAddr