Figure 2-6. Multiple Local Snmp Agents, Single Host Request/Response Connections - HP T9576G06 Management Manual

Installing and Configuring the SNMP Agent
Figure 2-6. Multiple Local SNMP Agents, Single Host Request/Response
Connections
SNMP
Agent
($ZSNM0)
In Figure 2-6 a successful configuration involving two SNMP agents uses the same
TCP/IP process for request/response communications. In this configuration, the
following is assumed:
$ZSNM0 and $ZSNM1 were started from different subvolumes with the built-in
defaults.
The default request/response connection definition associated using each SNMP
agent was altered as illustrated in the following SCF commands:
STOP ENDPOINT $ZSNM1.#DEFAULT
STOP ENDPOINT $ZSNM0.#DEFAULT
ASSUME PROCESS $ZSNM1
ALTER ENDPOINT #DEFAULT, HOSTADDR 130.25.88.2
START ENDPOINT #DEFAULT
ASSUME PROCESS $ZSNM0
ALTER ENDPOINT #DEFAULT, HOSTADDR 130.25.88.1
START ENDPOINT #DEFAULT
Each SNMP agent now has a distinct subnet to handle communication with SNMP
managers.
SNMP
Agent
($ZSNM1)
$ZTC0
SNMP Manager
SNMP Configuration and Management Manual—424777-006
VST304.vsd
2- 36
Multiple-Agent Connections