Info Profile Command - HP T9576G06 Management Manual

SCF Commands for the SNMP Agent
SNMP Info PROFILE
Name
*Community
$ZSNMP.#DEFAULT READONLY
$ZSNMP.#LANMGR
SNMP Info ENDPOINT
Name
$ZSNMP.#DEFAULT \EAST.$ZTC0
$ZSNMP.#REMOTE
SNMP Info TRAPDEST
Name
*Community
$ZSNMP.#TRAP
$ZSNMP.#REMOTE

INFO PROFILE Command

Use the INFO PROFILE command to display the current attribute values for an
authentication table entry.
INFO PROFILE [$agent-process.]#profile-name [, DETAIL ]
[$agent-process.]#profile-name
identifies the authentication table entry whose attribute values you want to display.
$agent-process
identifies the NonStop agent process to which the PROFILE object belongs. It
consists of a dollar sign ($) followed by one to five alphanumeric characters,
the first of which must be alphabetic.
#profile-name
identifies the PROFILE It consists of a pound sign (#) followed by one to seven
alphanumeric characters, the first of which must be alphabetic.
DETAIL
specifies that the display contain additional information about the object set.
Considerations: INFO PROFILE
The value in the community name field is truncated if it is too long to fit on a single line.
To display the full community name, use the DETAIL option.
*Access
READWRITE
*Network
\WEST.$ZTC0
*Network
\EAST.$ZTC0
\WEST.$ZTC1
SNMP Configuration and Management Manual—424777-006
*Hostaddr
0.0.0.0
130.252.86.10
*Hostaddr
0.0.0.0
0.0.0.0
*Hostaddr
130.252.86.10
130.252.86.241
5- 23
INFO PROFILE Command
public
Private
Tandem
public