HP T9576G06 Management Manual page 700

Ethernet Subagent
ZEMS-VAL-INTERNAL-FAILED
indicates that an internal error was encountered. The DDL AS clause associated
with this value ("internal-failed") is inserted in the message text following "cause."
ZESA-VAL-STATE-ENABLED
indicates the previous state of the Ethernet Subagent process. The DDL AS clause
of this value ("enabled") appears in the message text following "previous state."
ZESA-VAL-STATE-DISCONNECTED
indicates the current state of the Ethernet Subagent process. The DDL AS clause
of this value ("disconnected") appears in the message text following "current state."
configuration-fault-detail
provides additional information about the configuration ("invalid startup params").
ZEMS-VAL-NULL
indicates the type of subsystem defined event. Because the Ethernet Subagent
process has not defined this as a private event, the DDL AS clause "undefined"
always appears in the message text following "user content."
Cause. The startup parameters passed to the subagent process contain invalid
definitions or the specified agent process was not found.
Effect. The Ethernet Subagent terminates.
Recovery. Check the startup parameter string passed to the Ethernet Subagent.
Check the operating state of the specified SNMP agent process to ensure that it is
running and ready to accept subagent connections.
Sample Message
98-07-08 11:24:51 \NOVA.$ZESA
SNMP Configuration and Management Manual—424777-006
3013: ZESA-EVT-CONFIGURATION-INVALID
TANDEM.ETHSA.G06
Object unavailable Ethernet-SNMP-subagent -
\NOVA.$ZESA:384566222,
event number: startup-configuration-invalid,
cause: internal-failed,
previous state: enabled,
current state: disconnected,
symptom string: T0326G06_25JUN98_ETHSA:
main(), invalid startup params
user content: undefined
14-64
003013