1039: Ztsa-Evt-Lifgetattr-Error - HP T9576G06 Management Manual

TCP/IP Subagent
Cause. The LM_Get_Attributes_ function returned an error on the PIF.
Effect. The ifTable values obtained through the INFO command are not current until
the timer expires, the same ZLANMSRL call is retried, and a response obtained.
Recovery. Generally, this condition is transient, and no corrective action is necessary.
If the problem persists, contact your service provider and provide all relevant
information as follows:
Descriptions of the problem and accompanying symptoms
Details from the message or messages generated
Supporting documentation such as Event Management Service (EMS) logs
If your local operating procedures require contacting the GCSC, supply your system
number and the numbers and versions of all related products as well.
Sample Message
98-04-08 11:31:35 \NOVA.$ZTSA

1039: ZTSA-EVT-LIFGETATTR-ERROR

Unconditional Tokens
ZEMS-TKN-SUBJECT-MARK
ZTSA-TKN-SUBAGENT
ZEMS-TKN-EVENTNUMBER
ZEMS-TKN-TXFAULT-TYPE
ZEMS-TKN-USER-CONTENT
Conditional Tokens
None
Message Text
Transient Fault <1>-<2>, event number: <3>, fault type: <4>,
user content: <5>
ZTSA-TKN-SUBAGENT
identifies the subject of the event (the TCP/IP Subagent process). The DDL
heading of this token ("TCP/IP-SNMP-subagent") is inserted in the message text
following "Transient Fault."
ztsaProcessName
is the TCP/IP Subagent process name specified for the TCP/IP Subagent's private
ztsaProcessName MIB object.
SNMP Configuration and Management Manual—424777-006
1039: ZTSA-EVT-LIFGETATTR-ERROR
TANDEM.TCPIPSA.G05
TCP/IP-SNMP-Subagent-
\NOVA.$ZTSA:3693561, event number:
LM_Get_Attributes-error-on-PIF, fault type:
PIF-attr-cmd-not-completed, user content:
undefined
Value
<1> ZTSA-TKN-SUBAGENT
<2> ztsaProcessName
<3> ZTSA-EVT-LIFGETATTR-ERROR
<4> ZTSA-VAL-TF-LIFGETATTR
<5> ZEMS-VAL-NULL
8 -106
001023 Transient Fault