Host Resources Subagent
Table 11-6. hrDevice Group Objects Supported by Host Resources Subagent's
MIB (page 2 of 9)
Object and Attributes
hrDeviceDescr
1.3.6.1.2.1.25.3.2.1.3
read-only
DisplayString
(SIZE (0..64))
hrDeviceID
1.3.6.1.2.1.25.3.2.1.4
read-only
ProductID
Definition
Description of the
type of device
represented by the
entry.
An identifier
characterizing the
entry as a particular
device type and
subtype.
SNMP Configuration and Management Manual—424777-006
Format of Value
CPUs: CPUnn
(CPU--type).
Printers: collector
name of form
$printer-id.
Spooler collectors,
used as pseudo
printers, have name
form [\node--
name]$collector-
process- name
[.#group-name].
Disks: name and type
of the disk: $volume
(disk-type).
Tapes: $tape-
drive-name.
Network devices:
$network-
devicedrive-name.
OSS:$ disk-
fileset .
Loopback device:
$NOIOP.
The root of the
identifier is the same
for all entries:
1.3.6.1.4.1.169.3.180.
Appended to this
value are the type
and subtype values.
For example, the
hrDeviceID for a
4500 (1038-MB
formatted capacity
per spindle) disk
would look like this:
1.3.6.1.4.1.169.3.180.
3.22.
Refer to the Guardian
Procedure Calls
Reference Manual for
a complete list of all
device types and
complete list of all
device types and
subtypes.
11 -40
MIB Objects
Derivation of Value
For CPUs: Guardian
procedure
PROCESSOR_
GETINFOLIST_.
For printers: Spooler
procedure
SPOOLERSTATUS2.
For disks and tape drives:
Guardian procedures
DEVICE_
GETINFOBYLDEV_
and FILE_
GETINFOBYLISTNAME_
The product ID for a
device is a concatenation
of the product ID of the
Host Resources
Subagent subsystem and
the device type and
subtype. For processor
type, the device type is
set to 0.