HP T9576G06 Management Manual page 671

Ethernet Subagent
ZEMS-VAL-reason
indicates the reason the Ethernet Subagent process has become available. The
DDL AS clause associated with this value is inserted in the message text following
"reason."
Value of
ZEMS-TKN-CHANGE-REASON
ZEMS-VAL-UNDERLYING-UP
ZEMS-VAL-OPERATOR-INITIATED
ZESA-VAL-STATE-DISCONNECTED
indicates the previous state of the Ethernet Subagent process. The DDL AS clause
of this value ("disconnected") appears in the message text following "previous
state," indicating that the subagent was in a nonoperational state.
ZESA-VAL-STATE-CONNECTED
indicates the new state of the Ethernet Subagent process. The DDL AS clause of
this value ("connected") appears in the message text following "current state,"
indicating that the subagent is in a normal operational state.
ZEMS-VAL-NULL
indicates the type of subsystem defined event. Because the Ethernet Subagent
process has not defined this as a private event, the DDL AS clause "undefined"
always appears in the message text following "user content."
Cause. The Ethernet Subagent process completed process initialization after initial
startup or after a takeover by the backup process.
Effect. The startup configuration (or last saved configuration in the case of a takeover
by the backup) is used to establish connections with SNMP agent specified for the
subagent's private zesaAgentName object and to build MIB values derived from the
TCP/IP process specified by the zesaTcpIpProcess object.
Recovery. Informational message only; no corrective action is needed.
SNMP Configuration and Management Manual—424777-006
3001: ZESA-EVT-SUBAGENT-AVAIL
Associated Text (DDL AS Clause) and
Meaning
"underlying-serv-up" indicates that the
Ethernet Subagent process has come up
because an underlying resource on which it
depends has become available.
"operator-initiated" indicates that an operator
has brought the Ethernet Subagent process
up.
14-35