Mibs Supported By The Snmp Agent; Snmp Agent Mib Groups - HP T9576G06 Management Manual

3

MIBs Supported by the SNMP Agent

The SNMP agent supports two MIB-II groups and one private MIB group. The two MIB-
II groups provide information about agent and node configuration and SNMP message
traffic to SNMP managers. The private MIB group is defined by HP and lets you
monitor—and in some cases modify—SNMP agent configuration attributes from an
SNMP manager.
Definitions for objects within the SNMP agent's private MIB are contained in the file
ZSMPMIB. This MIB file is installed in the SNMP agent's installation subvolume (ISV)
and must be incorporated into the network management application's MIB. Objects
from the two groups from MIB-II are not included in the ISV. They belong to the System
and SNMP groups from MIB-II known to all SNMP managers.

SNMP Agent MIB Groups

The SNMP agent supports the objects in these three MIB groups:
System group. This MIB-II group provides configuration information about the
SNMP agent and the node on which it resides.
SNMP group. This MIB-II group provides statistical information about all the
SNMP message traffic that the SNMP agent handles.
zagInternal group. The zagInternal group constitutes the SNMP agent's private
MIB. It contains subgroups and objects that are defined by HP to control the
configuration and operation of the SNMP agent. The subgroups are
zagInProcess, zagInEndpoint, zagInProfile, and zagInTrapdest.
The System and SNMP groups are identified by a check mark in the following list and
are members of MIB-II:
iso (1)
identified-organization (3)
dod (6)
internet (1)
mgmt (2)
mib-II (1)
system (1)
snmp (11)
SNMP Configuration and Management Manual—424777-006
3 -1