SCF Commands for the SNMP Agent
ADD PROFILE Command
Use the ADD PROFILE command to define an authentication table entry.
ADD PROFILE [$agent-process.]#profile-name
[ , COMMUNITY "community-name" ]
[ , HOSTADDR "ip-address"]
[ , ACCESS { READONLY | READWRITE } ]
[$agent-process.]#profile-name
identifies the authentication table entry being defined.
$agent-process
identifies the NonStop agent process to which the PROFILE object belongs. It
consists of a dollar sign ($) followed by one to five alphanumeric characters,
the first of which must be alphabetic.
#profile-name
identifies the PROFILE object. It consists of a pound sign (#) followed by one
to seven alphanumeric characters, the first of which must be alphabetic.
COMMUNITY "community-name"
specifies the community name that must be present in requests sent by managers
for the NonStop agent to accept the request.
"community-name" is a case-sensitive of 1 to 50 character enclosed string
within quotation marks.
The default is "public."
HOSTADDR "ip-address"
specifies the Internet address of the managers whose security is being defined in
the authentication table entry.
Enter "ip-address" in standard Internet address dotted-decimal format—
consisting of the ASCII values of four bytes separated by periods—enclosed within
quotation marks. For example: 133.50.85.43.
The default ("0.0.0.0") indicates that the authentication table entry applies to all
managers.
SNMP Configuration and Management Manual—424777-006
5 -8
ADD PROFILE Command