HP T9576G06 Management Manual page 254

TCP/IP Subagent
Table 8-3. Private (ZTSA) MIB Objects Supported by the TCP/IP
Subagent (page 4 of 7)
Object and Attributes
ztsaEmsCollectorState*
1.3.6.1.4.1.169.3.202.16
read-write
INTEGER
ztsaKeepAliveTimer
1.3.6.1.4.1.169.3.202.17
read-write
INTEGER (0..32000)
ztsaRefreshNow
1.3.6.1.4.1.169.3.202.18
read-write
INTEGER
* See State Object/Resource Object Pairs
control or indicate the internal processing state of processes used by the subagent.
Definition
The state of the
connection between the
TCP/IP Subagent and
the EMS collector.
The number of seconds
between attempts the
subagent makes to
connect to a lost
resource or to restart the
backup process.
A means of forcing an
update of the MIB-II
tables and generating
traps (if needed).
on page 8-28 for information about TCP/IP Subagent objects that
SNMP Configuration and Management Manual—424777-006
Format and Derivation of Value
Following are valid values for the
state of the connection:
The connected and disconnected
states are set internally.
The disabled and enabled states
are set with an SNMP request as
illustrated by the state change
diagram in
page 8-29.
A value in the range 0 to 32000
specified for the -k startup
parameter. After startup, the
value can be set by an SNMP
manager.
The default is 60 seconds.
One of these values:
This object normally reads 0,
indicating that the MIB values are
refreshed at the rates indicated by
the values of the ztsaStatsCache,
ztsaInfoCache, and
ztsaStatusCache timers.
Setting this object to 1 causes the
subagent to update the MIB tables
and generate traps (if needed).
The object returns a value of 1
until the refresh is complete.
8- 24
ZTSA MIB Objects
connected (1)
disconnected (2)
disabled (3)
enabled (4)
Figure 8-3 on
autoDynamicRefresh (0)
forceDynamicRefresh (1)