HP T9576G06 Management Manual page 111

MIBs Supported by the SNMP Agent
Table 3-2. SNMP Group Objects Supported by SNMP Agent (page 3 of 3)
Object and Attributes
snmpOutNoSuchNames
1.3.6.1.2.1.11.21
read-only
Counter
snmpOutBadValues
1.3.6.1.2.1.11.22
read-only
Counter
snmpOutGenErrs
1.3.6.1.2.1.11.24
read-only
Counter
snmpOutGetRequests
1.3.6.1.2.1.11.25
read-only
Counter
snmpOutGetNexts
1.3.6.1.2.1.11.26
read-only
Counter
snmpOutSetRequests
1.3.6.1.2.1.11.27
read-only
Counter
snmpOutGetResponses
1.3.6.1.2.1.11.28
read-only
Counter
snmpOutTraps
1.3.6.1.2.1.11.29
read-only
Counter
snmpEnableAuthenTrap
s
1.3.6.1.2.1.11.30
read-write
INTEGER
Definition
The total number of PDUs
generated for which the value of
the error-status field was
'noSuchName.'
The total number of PDUs
generated for which the value of
the error-status field was
'badValue.'
The total number of PDUs
generated for which the value of
the error-status field was
'genErr.'
The total number of GetRequest
PDUs generated.
The total number of
GetNextRequest PDUs
generated.
The total number of SetRequest
PDUs generated.
The total number of
GetResponse PDUs generated.
The total number of trap PDUs
generated.
An indication of whether the
SNMP agent is permitted to
generate authenticationFailure
traps. This value is stored in
SNMPCTL.
SNMP Configuration and Management Manual—424777-006
3 -9
MIB Objects
Format and Derivation of
Value
An integer set by the SNMP
agent counter.
An integer set by the SNMP
agent counter.
An integer set by the SNMP
agent counter.
The constant value for this
object is 0.
The constant value for this
object is 0.
The constant value for this
object is 0.
An integer set by the SNMP
agent counter.
An integer set by the SNMP
agent counter.
Valid values are:
1 (enabled)
2 (disabled)
The default value is 1. At
initial startup, the value is set
to 1, but it can be reset by
an authorized SNMP
manager.