5 Understanding the Deployment Server
Rapid Deployment Pack populates the Deployment Server Console with jobs and the Deployment Server
directory with tools, scripts, configuration files, software drivers, and documentation files. This section explains
these provided jobs and files, and the directory structure.
Design philosophy
The provided jobs, perhaps with a few tweaks, are sufficient for generic operating system deployment. More
than likely, the provided jobs will act as templates and will need to be adapted and customized. When this
is the case, HP strongly recommends that you follow a copy, rename, and modify process – copy the job or
file, rename it so that the name conveys the new behavior, and make the necessary modifications. Doing
so will provide a clean separation between the customized jobs and the provided jobs. This will allow the
provided jobs to act as working baselines.
NOTE:
When editing ESX or Linux files on the Deployment Server, use a text editor that saves the file in
Linux compatible format without adding extra characters.
Jobs
Rapid Deployment Pack adds three root folders into the Jobs pane.
Table 5-1 Job folders
Folder
Server Deployment
Server Imaging
Server Deployment Toolbox
Server Deployment jobs
Unless otherwise indicated in the job name, the job uses the following default settings.
Table 5-2 Hardware configuration default settings
Component
System ROM
Smart Array
iLO
SAN HBA
Description
The jobs in this folder perform a complete server deployment. They deploy a default hardware
configuration, execute a scripted operating system installation, and install the appropriate ProLiant
or Integrity Support Pack.
The jobs in this folder perform a complete server deployment. They deploy a default hardware
configuration and a captured disk image.
The jobs in this folder provide granular control over the server deployment process. By providing
jobs that perform only hardware configuration, operating system installation, and value-add software
installation, you can combine various jobs together to suit your needs.
Default setting
None - .\lib\hwconfig\system\pl.xml or integrity.xml
RAID level based on the number of attached drives - .\lib\hwconfig\array\pl-acu-rd.xml
or i-acu-rd.xml
Not configured in the standard jobs
Not configured in the standard jobs
Design philosophy
27