Running The Ce Desktop Application; Video Mode Options - HP NetServer AA 6200 Administrator's Manual

Running the CE Desktop Application

The first time that you access the application, it runs in a window. After that, you can run the
CE Desktop application either in a window or in full-screen mode.
In a window, the application:
Runs in a window with the IOP desktop visible
Enables you to see CE and IOP applications
simultaneously
Runs with scroll bars and autoscrolling
Autoscrolling scrolls the window in the
direction of the mouse when you move the
mouse to any of the window's borders.
Restricts the movement of the mouse within the
perimeter of the CE Desktop when input focus
is directed to the CEs
To run the application in full screen mode:
1. Double click the CE Desktop icon on the title bar.
2. Check Full Screen Mode.
Full-screen mode is available only when the CE and IOP are running at the same video
resolution. To determine the video resolution in which the CE and IOP are running:
1. From the Task Bar, select Start
2. Select the Settings tab.
3. Note the resolution on both the CE and IOP.
4. If necessary, change the resolution by moving the slider on the Desktop Area so that both
CE and IOP run at the same resolution.
3-8
Table 3-2 Video Mode Options
Settings
In Full-Screen Mode, the
application:
Takes over the entire display and hides the
IOP desktop
Enables you to see the entire CE desktop
Runs without scroll bars
Control Panel Display.
HP Netserver AA Solution Administrator's Guide