Next Audittrail - HP NonStop TMF Programming Manual

Commands and Responses

NEXT AUDITTRAIL

The NEXT AUDITTRAIL command changes audit-trail files for a specified audit trail; it
stops new audit records from being added to the current audit-trail file and establishes
the next file in the audit-trail sequence as the current audit-trail file.
Command Syntax
For information on the tokens present in the command and response buffers, see the
SPI Programming Manual.
Command
ZTMF-CMD-Next
Object Type
ZTMF-OBJ-AuditTrail
Tokens in Command Buffer
ZTMF-TKN-AuditTrailId
Tokens in Response Buffer
None.
Tokens in Command Buffer
ZTMF-TKN-AuditTrailId
specifies an audit trail for which you want to change audit-trail files. This token is
required; only one occurrence is allowed. The following values are valid:
ZTMF-VAL-Mat
ZTMF-VAL-Aux01
ZTMF-VAL-Aux02
. . .
ZTMF-VAL-Aux015
Usage Guidelines
Only super-group users can issue this command. TMF must be started.
This command does not complete until new audit records are placed in a new audit-
trail file.
HP NonStop TMF Management Programming Manual—540140-008
token-type ZSPI-TYP-Enum.
Master audit trail
Auxiliary audit trail #1
Auxiliary audit trail #2
Auxiliary audit trail #15
5-136
NEXT AUDITTRAIL