Registering A Scan/Fax Program; Registering Programs - Konica Minolta bizhub C360 User Manual

9.2 One-Touch/User Box Registration
9.2.13

Registering a scan/fax program

You can register destinations to which faxes are frequently sent as programs together with Scan, Original,
and Communication Settings. If these are registered as programs, you can call a registered set of the desti-
nation and its Scan, Original, and Communication Setting by simply pressing the Mode Memory key.
Reference
-
-

Registering programs

1
2
3
Item
[Name]
[Address]
[URL Notif. Destination]
bizhub C360/C280/C220
Downloaded From ManualsPrinter.com Manuals
Up to 400 normal programs and up to 10 [Temporary One-Touch] can be registered as programs.
If 410 programs have been already registered, delete unnecessary programs before registering new
ones.
Press the Fax/Scan key on the control panel and then configure Scan Settings, Original Settings and
Communication Settings for which you want to register them as a program.
Press the Mode Memory key.
Select an unregistered program button, and then press [Register Program].
The Register Scan/Fax Program screen appears.
Description
Use the touch panel to enter the program name using up to 24 characters.
Allows you to select one destination. Select a destination from Address Book
or enter it directly.
•
•
Allows you to specify the destination to be notified by E-mail when a User
Box in the main unit, FTP, SMB or WebDAV job has finished. Select a desti-
nation from Address Book or enter it directly.
If [Confirm Address (Register)] is ON, a screen for entering a fax number
again appears after you specify a fax destination in the [Direct Input] tab
and press [OK]. Enter the fax number and then press [OK].
For details on the Confirm Address function, refer to page 10-21.
9
9-20