License Activation And Registration Process - Altigen Altiware OE 4.5 System Administration & Installation Manual

Software Installation
20. Setup will complete, whether or not the MVIP test passes, if Setup
cannot get the results of the MVIP test, or if the MVIP test is skipped.
You can restart your computer now or later, then click Finish to end
Setup.
21. If the MVIP test fails, it is recommended that you address the MVIP
failure before you reboot the system. You can manually run the MVIP
test program through Start>AltiWare>AltiWare Tools>MVIP test.
22. Reboot the system to finish the upgrade process.

License Activation and Registration Process

In AltiWare OE, a software license allows you to increase the capacity for
the following:
• Physical and IP extensions. A Quantum board can provide 4, 8, or 12
extensions (depending on the type of Quantum board) and the Triton
Analog Station board provides 12 extensions. You may increase the
number of software-supported extensions up to the maximum
available by adding station licenses. Each license you enter adds to the
previous total.
Each IP extension needs a license. For example, if a user has a station
in the office, a station at home, and a station at the Lake Tahoe Con-
ference House, licenses for three stations are required.
AltiWare OE System Administration Manual 65