Network Ap Commands - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3.2 Network AP Commands

ap
network
Displays the Access Port submenu. The functionality provided by this menu is supplied by various screen
under the Wireless menu item of the Web interface.
Syntax
admin(network)> ap
admin(network.ap)>
The items available under this command are shown below.
Command
add
copydefaults
default
delete
denyap
forget
list
mesh
remap
reset
revert
selfheal
set
show
smartscan
test
save
quit
..
/
Description
Adds entries to the Access Port adoption list.
Copies default AP settings to a connected AP.
Goes to the default submenu.
Deletes entries from the Access Port adoption lists.
Goes to the Deny AP submenu
Forgets AP parameters
Lists entries in the Access Port adoption list.
Goes to the Mesh submenu
Remaps channels for the AP in auto mode.
Resets an Access Port.
Reverts AP to Access Point (AP4131 or AP4121)
Goes to the Self-heal submenu
Sets Access Port parameters.
Shows Access Port parameters.
Goes to the Smart scan submenu
Goes to the test submenu.
Saves the configuration to system flash
Quits the CLI
Goes to the parent menu
Goes to the root menu
Network CLI Commands Reference
Ref
page 3-4
page 3-5
page 3-17
page 3-6
page 3-30
page 3-7
page 3-8
page 3-40
page 3-9
page 3-10
page 3-11
page 3-24
page 3-12
page 3-15
page 3-34
page 3-38
page 2-6
page 2-5
page 2-7
page 2-8
3-3