3-116 WS2000 Wireless Switch System Reference Guide
3.22.1 Network VLAN set Command
set
Network VLAN Commands
Sets VLAN parameters.
Syntax
set [assign-mode|default|vlan-id|trunk-port|allow]
Syntax:
assign-mode <mode>
default <vlan_id>
vlan-id <subnet_id>
<vlan_id>
trunk-port <port>
allow [vlans <list>|all|none]
Example
admin(network.vlan)>set assign-mode user
admin(network.vlan)>set default 3
admin(network.vlan)>show vlan 3
VLAN assignment mode
VLAN ID
VLAN Mapped Subnet
Default VLAN ID
Related Commands
show
Displays the VLAN settings.
Assigns the VLAN assignment mode <mode> to one of
Assigns the default VLAN ID to <vlan_id>, which is a number between
and 4094.
Sets the VLAN ID for subnet <subnet_id> (one of s1, s2, s3, s4, s5,or s6)
to <vlan_id> (1–4094).
Sets the Trunk Port <port> to one of
Sets the list of VLANs allowed access to the trunk port.
• vlans <list> – Sets the allowed VLANs from <list>, a comma separated
list of VLAN Ids.
• all – Sets the allowed VLANs to all VLANs.
• none – Sets the list of allowed VLANs to none.
: user
: 3
: Subnet3
: Yes
user
or port.
none
or wan.
1