Set - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

4.24.4 System WS2000 set Command

set

System WS2000 Commands
Sets WS 2000 system parameters.
Syntax
set [airbeam|ftp|ssh|applet|cc|cli|email|loc|name|domain-name|snmp|
timeout|limited-access|dns-ip|sslv2|support-sshv1|dns-relay-mode]
set airbeam [mode|passwd|logging]
set airbeam mode <mode>
set airbeam passwd <password>
set airbeam logging <mode>
set [ftp|ssh|snmp] [lan|wan] [mode <mode>|logging <mode>]
set [applet|cli] [lan|wan|slan|swan] [mode <mode>|logging <mode>]
set email <email>
set cc <country-code>
set loc <location>
set name <device-name>
set domain-name <domain>
set timeout <timeout>
set limited-access <mode>
set dns-ip <ip>;
Parameters
airbeam mode <mode> Enables or disables airbeam access. <mode> can be one of
airbeam passwd
<passwd>
airbeam logging
<mode>
applet
[lan|wan|slan|swan]
[mode <mode>|
logging <mode>]
cc <country-code>
Sets the airbeam password to <passwd>
Sets the logging mode for airbeam access.<mode> can be one of
disable.
Configures access to the applet.
• lan mode <mode> – Enables/disables http applet access from LAN.
• wlan mode <mode> – Enables/disables http applet access from WAN.
• slan mode <mode> – Enables/disables https applet access from LAN.
• swan mode <mode> – Enables/disables https applet access from WAN.
<mode> can be one of enable
logging <mode> – Enables/disables logging for each access type.
Sets the WS2000 two-letter country code to <country-code>.
System CLI Commands Reference
(1–39 characters).
or disable.
4-117
enable or disable.
enable or