Show - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-122 WS2000 Wireless Switch System Reference Guide
3.23.3 Network WAN show Command

show

Network WAN Commands
Shows the WAN parameters.
Syntax
show [ip|pppoe|mtuc]
Parameters
ip <idx>
pppoe
mtu
Example
admin(network.wan)>show ip 3
wan interface
ip address
network mask
default gateway
dhcp mode
primary dns server
secondary dns server
admin(network.wan)>show pppoe
pppoe mode
ip address
default gateway
primary dns server
secondary dns server
pppoe keepalive mode
pppoe authentication type
pppoe idle time
pppoe user name
pppoe password
pppoe MSS
Shows the general IP parameters for the WAN along with settings for the WAN interface
associated with <idx> (where <idx> is in the range 1–8).
Note: If the WAN interface IP addresses have not been specified for <idx>, the IP and Mask values
will be shown as 0.0.0.0.
Shows all PPPoE settings.
Sets MTU size of wan interface. The minimum value is 128 bytes and maximum is 1500
bytes.
: enable
: 0.0.0.0
: 0.0.0.0
: 192.168.24.1
: enable
: 209.142.0.2
: 209.142.0.218
: disable
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: disable
: pap/chap
: 600
:
: ********
: 1452