Chapter 3: Network Cli Commands Reference; Network - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

Network CLI Commands Reference
Network commands are used to configure the different network parameters of the WS2000 Wireless Switch.

3.1 network

Admin Menu Commands
Use the command to go the Network menu.
network
admin> network
admin(network)>
The following commands are available under the Network menu:
Command
ap
dhcp
fw
ipfilter
lan
port
qos
router
urlfilter
vlan
wan
wids
wips
wlan
save
quit
..
/
Description
Goes to the Access Port Submenu.
Goes to the DHCP Submenu
Goes to the Firewall Submenu
Goes to the IP Filter Submenu
Goes to the LAN Submenu
Goes to the Port Submenu
Goes to the QOS Submenu
Goes to the Router Submenu
Goes to the URL Filter Submenu
Goes to the VLAN Submenu
Goes to the WAN Submenu
Goes to the WIDS Submenu
Goes to the WIPS Submenu
Goes to the WLAN Submenu
Saves the configuration to system flash
Quits the CLI
Goes to the parent menu
Goes to the root menu
Ref.
page 3-3
page 3-48
page 3-51
page 3-234
page 3-87
page 3-231
page 3-105
page 3-109
page 3-255
page 3-115
page 3-118
page 3-248
page 3-238
page 3-170
page 2-6
page 2-5
page 2-7
page 2-8