Set - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-250 WS2000 Wireless Switch System Reference Guide
3.48.2 Network WIDS set Command

set

Network WIDS Commands
Sets the WIDPS parameters.
Syntax
set [mode|detect-window|anomaly-detect|excess-op]
set mode <mode>
set detect-window <detect-window>
set anomaly-mode [mode|filter-ageout]
set anomaly-mode mode <violation-type> <mode>
set anomaly-mode filter-ageout <type> <filter-ageout>
set excess-op [threshold|filter-ageout]
set excess-op threshold [mu|radio|switch] <type> <threshold>
set excess-op filter-ageout <type> <filter-ageout>
Parameters
mode <mode>
detect-window
<detect-window>
Enables or disables WIDS. <mode> can be
Sets the duration for which WIDS information is collected to <detect-window> (5-
300) seconds. Once collected, the information is sent for analysis. The deafult value for
<detect-window> is 10 seconds.
enable or disable.