Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual page 214

3-178 WS2000 Wireless Switch System Reference Guide
handshake-retry-count <idx>
<retry-count>
secure-beacon <idx> <mode> Enables or disables secure beacon for the WLAN <idx> (1–8)
enforce-pmk-validation
<mode>
wireless-stp <mode>
Example
admin(network.wlan)>set name 1 store
admin(network.wlan)>set name 2 backoff
admin(network.wlan)>set auth 1 kerberos
Kerberos requires WEP 104 or Keyguard. The encryption type has been
changed to W
EP104.
admin(network.wlan)>set no-mu-mu 1 enable
admin(network.wlan)>show wlan 1
wlan name
ess identifier
wlan mode
subnet
vlan_id
enc type
auth type
voice prioritization
disallow mu to mu
answer broadcast ess
secure beacon mode
default mu acl mode
default ap adopt mode
multicast address 1
multicast address 2
handshake timeout in milliseconds : 2000
handshake retry count
admin(network.wlan)>
Sets the 802.11i handshake retry count to <retry-count> (1-10) for the
WLAN <idx> (1–8). This in conjunction with the
command controls the handshake retry time and retry count for those MUs
that do not receive EAPOL messages.
Enables or disables PMK validation across association and EAPOL packets
Enable or disables STP on wireless side
: WLAN1
: 101
: enable
: s1
: 1
: none
: none
: enable
: disable
: disable
: disable
: allow all
: allow all
: 01005E000000
: 09000E000000
: 3
handshake-timeout