Add - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-228 WS2000 Wireless Switch System Reference Guide
3.43.2 Network WLAN WLAN IP Filter Policy add Command

add

Network WLAN WLAN IP Fiter Policy Commands
Adds a new IP Filter association table entry. IP Filters have to be set up through the Network > IPFilter menu.
Syntax
add <wlan-idx> <filter-name> <direction> <action>
Parameters
add <wlan-idx> <filter-name> <direction> <action>
Adds a new IP Filter association table entry. The <filter-name> is the name of the filter to be
added to the WLAN specified by the <wlan-idx> (1-8). The <direction> could be
outgoing. The <action> could be
Example
admin(network.wlan.wlanipfpolicy)> add 1 allow_tcp incoming allow
admin(network.wlan.wlanipfpolicy)> add 1 allow_tcp outgoing deny
admin(network.wlan.wlanipfpolicy)> show 1
-------------------------------------------------------------------------
Filter-Name
-------------------------------------------------------------------------
allow_tcp
allow_tcp
IP Filter Mode
Default Incoming Action
Default Outgoing Action
allow or
Direction Action
incoming allow
outgoing deny
: enable
: allow
: allow
deny.
incoming or