Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual page 85

3.10.1 Network DHCP set Command
set
Network DCHP Commands
Sets parameters for automated firmware and configuration upgrades.
Syntax
set [firmwareupgrade|configureupgrade|interface|
dhcpvendorclassid|autoupgradeinterval]
firmwareupgrade [0|1] Enables (1) or disables (0) automatic switch firmware upgrade.
configupgrade [0|1]
interface <iface>
dhcpvendorclassid
<dhcp vendor class id>
autoupgradeinterval
<autoupgradeinterval>
Example
admin(network.dhcp)>show all
Auto Firmware upgrade flag
Auto Config upgrade flag
Interface
admin(network.dhcp)>set firmwareupgrade 1
admin(network.dhcp)>set con 1
admin(network.dhcp)>set inter s1
admin(network.dhcp)>show all
Auto Firmware upgrade flag
Auto Config upgrade flag
Interface
Related Commands
show all Shows the settings for all the automatic update parameters.
Enables (1) or disables (0) automatic switch configuration update.
Sets the interface <iface> for the upgrades to the device:
s1 – subnet 1
s2 – subnet 2
s3 – subnet 3
s4 – subnet 4
s5 – subnet 5
s6 – subnet 6
w – WAN
Sets the DHCP vendor class id to <dhcp vendor class id>.
Note: Vendor class id must be preceded by "Sym".
Sets the Light Weight DHCP Client Auto Upload time interval to
<autoupgradeinterval> (1-65535) seconds.
: 0
: 0
: w
: 1
: 1
: s1
Network CLI Commands Reference
3-49