Move - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3.14.5 Network Firewall Policy Inbound move Command

move

Network Firewall Policy Inbound Commands
Moves a firewall policy to a different position in the list and renumbers all affected items in the list.
Syntax
move [up|down] <idx>
Parameters
[up|down] <idx>
Example
admin(network.fw.policy.inb)>list
----------------------------------------------------------------------
Idx Src IP-Netmask
-------------------------------------------------------------------------
1 209.239.160.202- 168.192.36.4- gre 20:21
255.255.255.224
2 209.239.179.52-
255.255.255.224
admin(network.fw.policy.inb)>move up 2
admin(network.fw.policy.inb)>list
-------------------------------------------------------------------------
Idx Src IP-Netmask
-------------------------------------------------------------------------
1 209.239.179.52-
255.255.255.224
2 209.239.160.202- 168.192.36.4- gre 20:21
255.255.255.224
Moves policy with index <idx> up or down one (to a lower or a higher number) in
the policy list.
Dst IP-Netmask Tp
255.255.255.0
168.192.56.4- all 1:
255.255.255.0
Dst IP-Netmask Tp
168.192.56.4- all 1:
255.255.255.0
255.255.255.0
Network CLI Commands Reference
SPorts DPorts Rev. NAT
200: 0.0.0.0
201 nat port 0
1: 0.0.0.0
65535 65535 nat port 0
SPorts DPorts Rev. NAT
1: 0.0.0.0
65535 65535 nat port 0
200: 0.0.0.0
201 nat port 0
3-71
Action
allow
deny
Action
deny
allow