Export - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

4-12 WS2000 Wireless Switch System Reference Guide
4.4.2 System Config export Command

export

System Configuration Commands
Exports the configuration from the system.
Syntax
export [ftp|tftp|terminal|sftp]
Syntax:
export
[ftp|tftp|terminal
sftp]
Example
Export FTP Example:
admin(system.config)>set server 192.168.22.12
admin(system.config)>set user myadmin
admin(system.config)>set passwd
admin(system.config)>export ftp
Export operation
Building configuration file
File transfer
File transfer
Export operation
Export TFTP Example:
admin(system.config)>set server 192.168.0.101
admin(system.config)>export tftp
Export operation
Building configuration file
File transfer
File transfer
Export operation
Export Terminal Example:
admin(system.config)>export terminal
//
// WS2000 Configuration Command Script
// System Firmware Version: 1.5.0.0-160b
//
system
ws2000
Exports the system configuration.
• ftp – Exports the configuration to the FTP server. Use the set command to set the
server, user, password, and file name before using this command.
• tftp – Exports the configuration to the TFTP server. Use the set command to set the IP
address for the TFTP server before using the command.
• terminal – Exports the configuration to the terminal.
• sftp – Exports the configuration to the sftp server.
: [ Started ]
: [ Done ]
: [ In progress ]
: [ Done ]
: [ Done ]
: [ Started ]
: [ Done ]
: [ In progress ]
: [ Done ]
: [ Done ]