Chapter 4: System Cli Commands Reference; System - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

System commands are used to set the system parameters for the WS 2000 Wireless Switch.

4.1 system

Admin Menu Commands
Use the command to go to the System menu.
system
admin> system
admin(system)>
The following commands are available under the System menu:
Command
lastpw Displays the last debug password.
exec Execute a linux command.
config Goes to the config submenu.
logs Goes to the logs submenu.
ntp Goes to the NTP submenu.
snmp Goes to the SNMP submenu.
userdb Goes to the userdb submenu.
radius Goes to the RADIUS submenu.
test Goes to the test submenu.
WS2000 Goes to the WS2000 submenu.
authentication Goes to the authentication submenu.
ssh Goes to the SSH submenu.
redundancy Goes to the redundancy submenu.
cf Goes to the CF submenu.
http Goes to the HTTP submenu
save Saves the configuration to system flash
quit Quits the CLI
.. Goes to the parent menu
/ Goes to the root menu
System CLI Commands Reference
Description Ref.
page 4-2
page 4-3
page 4-10
page 4-22
page 4-28
page 4-70
page 4-92
page 4-33
page 4-127
page 4-113
page 4-4
page 4-89
page 4-66
page 4-122
page 4-124
page 2-6
page 2-5
page 2-7
page 2-8