Network Firewall Policy Commands; Policy - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-64 WS2000 Wireless Switch System Reference Guide

3.13 Network Firewall Policy Commands

policy

Network Firewall Commands
Displays the firewall policy submenu.
Syntax
admin(network.fw)> policy
admin(network.fw.policy)>
NOTE: The Policy menu can only be accessed when Subnet Access Override mode
is enabled. To enable Subnet Access Override use the command
The items available under this command are shown below.
Command
inbound
outbound
import
quit
save
..
/
admin(network.fw)> set override enable
Goes to the inbound policy submenu.
Goes to the outbound policy submenu.
Imports subnet access rules.
Quits the CLI.
Saves the configuration to system flash.
Goes to the parent menu.
Goes to the root menu.
Description Ref.
page 3-66
page 3-73
page 3-65
page 3-1
page 3-1
page 3-1
page 3-1