Delete - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-6 WS2000 Wireless Switch System Reference Guide
3.2.3 Network AP delete Command

delete

Network AP Commands
Deletes entries from the Access Port adoption list. In the Web interface, this functionality is found on the
Wireless screen in the Access Port Adoption list area.
Syntax
delete <idx> [<entry>|all]
Parameters
<idx> [<entry>|all]
Example
The following example first lists out the adoption list entries for WLAN 1, deletes the second entry for WLAN
1, and finally displays the list for WLAN 1 showing that the entry has been deleted.
admin(network.ap)>list 1
-------------------------------------------------------------------------
index start mac
-------------------------------------------------------------------------
1 000000000000
2 004000000000
admin(network.ap)>delete 1 2
admin(network.ap)>list 1
-------------------------------------------------------------------------
index start mac
-------------------------------------------------------------------------
1 000000000000
Related Commands
add Adds entries to the adoption list.
list Lists entries in the Access Port adoption list.
Deletes an entry in the Access Port adoption list as specified by <entry>, which is
the number listed in the adopted list (use the
(1-8).
all indicates deleting all the adoption list entries.
end mac
00306542B965
005000000000
end mac
00306542B965
command) for WLAN <idx>
list