4.9.2 System RADIUS EAP set Command
set
System RADIUS EAP Commands
Sets the EAP parameters. To configure each of the selected authentication types, go to the submenu
associated with each type.
Syntax
set auth [peap|ttls|both]
Parameters
auth [peap|ttls|both]
Example
admin(system.radius.eap)>set auth peap
admin(system.radius.eap)>show all
Default EAP Type
Related Commands
show all
Shows the EAP settings.
Sets the default authorization type to one of
selected, go to the submenu associated with the selection to finish the setup.
: peap
System CLI Commands Reference
PEAP
or
TTLS
or both. When
4-43