Partial - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

4.4.4 System Config partial Command

partial

System Configuration Commands
Resets the switch's configuration to the factory default settings for all settings except the WAN and some
SNMP related settings. The following settings will remain intact when using Restore Partial Default
Configuration:
• All settings on the WAN page
• SNMP access to the WS 2000 on the WS 2000 Access page
• All settings on the SNMP Access page
Before using this feature, consider exporting the current configuration for safekeeping.
Syntax
partial
Parameters
None
Example
admin(system.config)>partial
Are you sure you want to partially default WS 2000? (yes/no):yes
*************************************************************************
System will now restore default configuration. You will need to set the
country code for correct operation.
*************************************************************************
Restoring default configuration
Related Commands
export Exports system configuration settings.
System CLI Commands Reference
: [ In progress ]
4-15