4.10 System RADIUS EAP PEAP Commands
peap
System RADIUS EAP Commands
Displays the PEAP submenu.
Syntax
admin(system.radius.eap)> peap
admin(system.radius.eap.peap)>
The items available under this command are shown below.
Command
set
Sets the PEAP authentication type.
show
Shows the PEAP authentication type.
quit
Quits the CLI
save
Saves the configuration to system flash
..
Goes to the parent menu
/
Goes to the root menu
Description
System CLI Commands Reference
Ref.
page 4-46
page 4-47
page 4-1
page 4-1
page 4-1
page 4-1
4-45