Forget - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3.2.4 Network AP forget Command

forget

Network AP Commands
Forgets the AP parameters at a particular index specified by the <idx> value.
Syntax
forget [<idx>|all]
Parameters
<idx>|all
Example
The following syntax shows the forget command.
admin(network.ap)>forget 1
admin(network.ap)>save
<idx> – The index to remove the AP parameters.
all – Removes all AP parameters from all the indices in the AP adoption list.
Network CLI Commands Reference
3-7