Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual page 111

3.15.2 Network Firewall Policy Outbound delete Command
delete
Network Firewall Policy Outbound Commands
Deletes an outbound firewall policy.
Syntax
delete [all|<idx>]
Parameters
<idx>
all
Example
admin(network.fw.policy.outb)>list
-------------------------------------------------------------------------
----
Idx Src IP-Netmask Dst IP-Netmask Tp SPorts DPorts Rev. NAT Action
-------------------------------------------------------------------------
----
1 209.239.179.52- 168.192.56.4- all 1:
255.255.255.224 255.255.255.0
2 209.239.160.202- 168.192.36.4- gre 20:21 200: 0.0.0.0 allow
255.255.255.224 255.255.255.0
admin(network.fw.policy.outb)>del 1
admin(network.fw.policy.outb)>list
-------------------------------------------------------------------------
----
Idx Src IP-Netmask Dst IP-Netmask Tp SPorts DPorts Rev. NAT Action
-------------------------------------------------------------------------
----
1 209.239.160.202- 168.192.36.4- gre 20:21 200: 0.0.0.0 allow
255.255.255.224 255.255.255.0
Deletes inbound firewall policy <idx> from the policy list.
Deletes all outbound firewall policies.
Network CLI Commands Reference
1: 0.0.0.0 deny
65535 65535 nat port 0
201 nat port 0
201 nat port 0
3-75