3-148 WS2000 Wireless Switch System Reference Guide
3.28.4 Network WAN VPN list Command
list
Network WAN VPN Commands
Lists security policy database (SPD) entries.
Syntax
list {<name>}
Parameters
Lists all tunnel entries.
<name>
Lists detailed information about tunnel named <name>. Note that the <name> must
match case with the name in the SPD entry. "Bob" is not equal to "bob", as shown in the
example below.
Example
admin(network.wan.vpn)>list
-------------------------------------------------------------------------
Tunnel Name
Subnet
-------------------------------------------------------------------------
Eng2EngAnnex
1
Bob
1
admin(network.wan.vpn)>list bob
bad index value
admin(network.wan.vpn)>list Bob
-------------------------------------------------------------------------
Detail listing of VPN entry:
-------------------------------------------------------------------------
Name
Local Subnet
Tunnel Type
Remote IP
Remote IP Mask
Remote Security Gateway
Local Security Gateway
AH Algorithm
Encryption Type
Encryption Algorithm
ESP Inbound SPI
ESP Outbound SPI
Type
Remote IP/Mask
Manual
192.168.32.2/24
Manual
206.107.22.45/27
: Bob
: 1
: Manual
: 206.107.22.45
: 255.255.255.224
: 206.107.22.2
: 209.239.160.55
: None
: ESP
: DES
: 0x00000100
: 0x00000100
Remote Gateway
Local WAN IP
192.168.33.1
192.168.24.198
206.107.22.2
209.239.160.55