Network Firewall Submap Commands; Submap - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-80 WS2000 Wireless Switch System Reference Guide

3.16 Network Firewall Submap Commands

submap

Network Firewall Commands
Displays the subnet mapping submenu.
Syntax
admin(network.fw)> submap
admin(network.fw.submap)>
NOTE: The submap menu can only be accessed when Subnet Access Override
mode is disabled. To disable Subnet Access Override use the command
The items available under this command are shown below.
Command
add
delete
list
set
show
quit
save
..
/
admin(network.fw)> set override disable
Adds subnet access exception rules.
Deletes subnet access exception rules.
Lists subnet access exception rules.
Sets subnet access parameters.
Shows subnet access parameters.
Quits the CLI.
Saves the configuration to system flash.
Goes to the parent menu.
Goes to the root menu.
Description Ref.
page 3-81
page 3-83
page 3-84
page 3-85
page 3-86
page 3-1
page 3-1
page 3-1
page 3-1