[Headset] Registering An Optional Cordless Headset - AT&T SB67040 User Manual

[Headset] Registering an Optional Cordless Headset

You can register only one AT&T SB67040 Cordless Handset and only one AT&T TL7600 Cordless Headset to a Deskset, and up to
five Desksets can have cordless accessories. When a Deskset has cordless accessories, they are all part of the same extension,
and only one device can be used at a time.
To register the TL7600 Cordless Headset:
Cordless Headset Registration
Cordless Headset is currently
Not Registered .
Place Cordless Handset in charger.
Register
Press to begin process.
Register
Figure 83. Cordless Headset Not
Registered
Settings
Synapse User's Guide
1. Press MENU, then 2, and then 6 to display the Cordless Settings menu shown in
Figure 78 on page
The Headset must be in the charger, otherwise registration cannot proceed.
Even if the Cordless Headset has been in its charger, remove and replace the
Cordless Headset right before you press
Quick
2. Press 2 to display the Cordless Headset Registration screen shown in Figure 83.
Dial
Exit
3. Press
for the Handset.
4. When registration is complete, Cordless Headset is currently Registered
displays and the Cordless Headset ON/OFF light turns solid blue.
5. Press
Registration can be terminated by pressing CANCEL on the Deskset.
If the Cordless Handset is registered to another Deskset, it must be
deregistered first. See
Accessory" on page
90.
. Registration in Progress... appears while the Deskset searches
. The Cordless Settings menu displays.
"[Handset, Headset] Deregistering a Cordless
93.
92
on the Deskset.